DESCRIPTION This mobile welding fumes filter is BGIA-certified for all TEKA suction arms (0 150 mm). Separation efficiency is = 99 %. The unit corresponds to the security requirements for units of the welding fume category W3 (high-alloyed steels). When handling the unit correctly, you can use it for circulating air operation because it fulfils the requirements for the exceptional rules according to the new hazardous substances ordinance. A stable construction made of steel plate with continuous powder coating guarantees a low maintenance even under rough conditions. The gross particles are separated in the pre-filter. Afterwards the air is guided through the particle filter where even finest fumes and dusts are separated. The lifting device guarantees an absolute impermeability and therefore the separation efficiency of the filter unit. The air is evacuated on the backside of the unit through an outlet grill and rises up. Thus, at a distance of 1 m you cannot perceive a disturbing air flow any more. The unit is fitted with a high-capacity fan with high negative pressure which guarantees a high volumetric flow even if the filter is saturated.
STANDARD EQUIPMENT
Extensive pre-filter mat
Particle filter with separation efficiency = 99 %
Optical and acoustic filter monitoring Lifting device
Operation hour meter
Mains plug with sense of rotation display (for 400 V version) Operation control lamp
OPTIONALLY AVAILABLE (WITH BGIA CERTIFICATION)
Auto start-stop
Lighting equipment
On/off switch via suction hood
OPTIONALLY AVAILABLE (WITHOUT BGIA CERTIFICATION)
Aluminium pre-filter Activated carbon element
TECHNICAL DATA CAREMASTER - BGIA mechanical filter unit
